Rod Seal R04
DESCRIPTION
Rod seal R04 is packing set for sealing piston rods and is also intended for standardized housings according to ISO5597. Set includes five, or six, or seven pieces.
APPLICATION
Mining equipment, Injection molding machines, Presses, Escavator cylinders, Steel mill cylinders, Water hydraulics..etc.
| Standard materials | ||
|---|---|---|
| Material designation | SN102 | SF106 |
| Base ring | NBR / fabric | FPM / fabric |
| V- ring | NBR / fabric | FPM / fabric |
| Adapter ring | NBR / fabric POM |
FPM / fabric PTFE+aditiv |
Alternate materials:
For applications that may require alternative materials or for verification current availability of tools and part numbers, contact us.
| Pressure, Speed | |
|---|---|
| Working pressure, P | 40 MPa |
| Running speed, v | 0,5 m/s |
| Medium, Working Temperature | ||
|---|---|---|
| Material Set Code | SN102 | SF106 |
| Hydraulic oils: HL, HLP | -30.. +100 ˚C | -15.. +150 ˚C |
| HFA, HFB fluids | +5..+60 °C | +5..+60 °C |
| HFC fluids | -30..+60˚C | -15.. +60 ˚C |
| HFD fluids | – | -15.. +150 ˚C |
| Water | +5..+100 °C | +5..+ 80 ˚C |
| Mineral greases | -30..+100°C | -15.. +150 ˚C |
| Tolerances | ||
|---|---|---|
| Rod Ød | Clearance fit, e | Housing ØD |
| > 150 … 500 | H8/f7 | H11 |
| > 500 … 630 | H8/f7 | H10 |
| > 630 … 800 | H8/f7 | H10 |
| Surface finish* | ||
|---|---|---|
| Surface roughness | Ra | Rmax |
| Sliding surface | 0,05 do 0,3 μm | ≤ 2,5 μm |
| Surface of housing, i.D | ≤ 1,6 μm | ≤ 6,3 μm |
| Sides of housing | ≤ 3,0 μm | ≤ 15 μm |
| Lead-in chamfers | ≤ 4,0 μm | ≤ 16 μm |
Contat area Mr = 50% to 90% at cutting depth c=Rz/2 and reference line Cref=0%
| Seal Housing | ||||
|---|---|---|---|---|
 |
The occurrence of high friction immediately during installation or during operation at elevated temperatures is eliminated by extending the installation site. This can be done with re-adjustable housings by installing the required number of washers. It is recommended that this extension be 2.5% of the groove length.
After a long period of operation and possible wear, the service life and good sealing effect can be extended by tightening the seal. This is done by removing a number of washers. It is recommended that this shortening is 7.5% of the groove length. |
|||
| Lead-in chamfers | ||||
|---|---|---|---|---|
| Cross section S, mm | 12.5 | 15 | 20 | 25 |
| Lead-in chamfers C, mm | 7.5 | 7.5 | 10 | 15 |
d (mm) | D (mm) | H (mm) | L (mm) | Material | Type | Order code | Sing in | |
|---|---|---|---|---|---|---|---|---|
150 | 180 | 45 | 45 | SN102 | R04-5 | R04-888001 | 
| |
150 | 180 | 60 | 60 | SN102 | R04-7 | R04-888002 |
| |
160 | 185 | 40 | 40 | SN102 | R04-5 | R04-888003 |
| |
160 | 190 | 45 | 45 | SN102 | R04-5 | R04-888004 |
| |
160 | 190 | 50 | 50 | SN102 | R04-5 | R04-888005 |
| |
160 | 190 | 60 | 60 | SN102 | R04-7 | R04-888006 |
| |
180 | 205 | 40 | 40 | SN102 | R04-5 | R04-888007 |
| |
180 | 210 | 45 | 45 | SN102 | R04-5 | R04-888008 |
| |
180 | 210 | 50 | 50 | SN102 | R04-5 | R04-888009 |
| |
180 | 210 | 60 | 60 | SN102 | R04-7 | R04-888010 |
| |
200 | 225 | 40 | 40 | SN102 | R04-5 | R04-888011 |
| |
200 | 230 | 45 | 45 | SN102 | R04-5 | R04-888012 |
| |
200 | 230 | 50 | 50 | SN102 | R04-5 | R04-888200 |
| |
200 | 230 | 50.5 | 50.5 | SN102 | R04-5 | R04-888013 |
| |
200 | 230 | 60 | 60 | SN102 | R04-7 | R04-888015 |
| |
220 | 250 | 50 | 50 | SN102 | R04-6 | R04-888023 |
| |
220 | 250 | 50.5 | 50.5 | SN102 | R04-5 | R04-888024 |
| |
220 | 250 | 60 | 60 | SN102 | R04-7 | R04-888026 |
| |
225 | 255 | 50.5 | 50.5 | SN102 | R04-5 | R04-888449 |
| |
225 | 255 | 60 | 60 | SN102 | R04-7 | R04-888029 |
| |
240 | 270 | 50.5 | 50.5 | SN102 | R04-5 | R04-888450 |
| |
240 | 270 | 60 | 60 | SN102 | R04-7 | R04-888038 |
| |
250 | 280 | 45 | 45 | SN102 | R04-5 | R04-888425 |
| |
250 | 280 | 50 | 50 | SN102 | R04-6 | R04-888040 |
| |
250 | 280 | 50.5 | 50.5 | SN102 | R04-5 | R04-888041 |
| |
250 | 280 | 60 | 60 | SN102 | R04-7 | R04-888043 |
| |
260 | 290 | 50.5 | 50.5 | SN102 | R04-5 | R04-888451 |
| |
260 | 290 | 60 | 60 | SN102 | R04-7 | R04-888047 |
| |
280 | 310 | 45 | 45 | SN102 | R04-5 | R04-888203 |
| |
280 | 310 | 60 | 60 | SN102 | R04-6 | R04-888053 |
| |
280 | 310 | 50.5 | 50.5 | SN102 | R04-5 | R04-888054 |
| |
280 | 310 | 60 | 60 | SN102 | R04-7 | R04-888056 |
| |
280 | 320 | 80 | 80 | SN102 | R04-7 | R04-888058 |
| |
300 | 330 | 45 | 45 | SN102 | R04-5 | R04-888426 |
| |
300 | 330 | 58 | 58 | SN102 | R04-6 | R04-888427 |
| |
300 | 340 | 80 | 80 | SN102 | R04-7 | R04-888065 |
| |
320 | 360 | 63 | 63 | SN102 | R04-6 | R04-888320 |
| |
320 | 360 | 80 | 80 | SN102 | R04-7 | R04-888284 |
| |
340 | 380 | 80 | 80 | SN102 | R04-7 | R04-888084 |
| |
360 | 390 | 50.5 | 50.5 | SN102 | R04-5 | R04-888452 |
| |
360 | 390 | 58 | 58 | SN102 | R04-6 | R04-888428 |
| |
360 | 390 | 60 | 60 | SN102 | R04-7 | R04-888094 |
| |
360 | 400 | 63 | 63 | SN102 | R04-6 | R04-888321 |
| |
360 | 400 | 80 | 80 | SN102 | R04-7 | R04-888096 |
| |
370 | 410 | 80 | 80 | SN102 | R04-7 | R04-888099 |
| |
380 | 420 | 80 | 80 | SN102 | R04-7 | R04-888103 |
| |
400 | 430 | 50.5 | 50.5 | SN102 | R04-5 | R04-888453 |
| |
400 | 430 | 52.5 | 52.5 | SN102 | R04-6 | R04-888108 |
| |
400 | 430 | 60 | 60 | SN102 | R04-7 | R04-888109 |
| |
400 | 440 | 70 | 70 | SN102 | R04-6 | R04-888110 |
|