DESCRIPTION
Guide ring G04 is a non-metallic strip or ring for piston head of hydraulic and pneumatic cylinders and is installed in standardized housings according to ISO 10766.
Some G4 ring sizes have special dimensions and cannot be fitted into standard housings per ISO 10766 and are provided as an option for specific applications.
Guide ring G04 has chamfered profile edges to prevent the edge from pressing into the corner radii of the housing groove.
APPLICATION
Standard hydraulic cylinders, medium range.
Truck tail lift
Telescopic cilinders
Forklift truck
Stabilizer cilinders
Agriculture equipment
Standard material | |||
---|---|---|---|
Material base | POM + Glass | PA + Glass fibre | |
Material Code | P6241 | P6411 |
Pressure, Speed | |||
---|---|---|---|
Speed, Max, m/s | 0,8 | 1,0 |
Medium, Working Temperature | |||
---|---|---|---|
Material Code | P6241 | P6411 | |
Hydraulic oils: HL, HLP | -40 to +110˚C | -40 to +130˚C | |
HFA, HFB fluids | +5 to +55˚C | +5 to +55˚C | |
HFC fluids | -30 to +60˚C | -30 to +60˚C | |
HFD fluids | -30 to +80˚C | -30 to +90˚C | |
Water | to +80˚C | +5 to +50˚C | |
Mineral greases | -40 to +110˚C | -40 to +130˚C |
Permissible specific load pressure, Max, N/mm2 | |||
---|---|---|---|
Material Code | at t = 25°C | at t = 60°C | at t > 60°C |
P6241 | 40 | 30 | 25 |
P6411 | – | 60 | 30 |
When calculating the width of Ring it is recomended Safety factor f = 2
Read More
Tolerances, mm
d
D
H
S
h8/h9
H8
-0.1 to -0.4
-0.02 to -0.08
Max. permissible gap dimension in area of the guide ring, e
Ød
e min
e max
≤ 20
0,20
0,30
21 – 100
0,25
0,40
101 – 200
0,30
0,60
Recommended Ring Gap, Z, mm
Ød
Ring Gap Z
≤ 40
2.0 – 2.5
41 – 140
2.5 – 3.5
141 – 200
3.5 – 4.5
201 – 250
4.5 – 5.5
Surface quality*
Surface roughness
Ra
Rz
Rmax
Sliding surfaces
0.1 .. 0,4 μm
0.63 .. 2.5 μm
1.0 .. 4 μm
Groove surfaces
≤ 2.5 μm
≤ 10 μm
≤ 16 μm